Enable wi-fi and select eduroam
- Open Settings
- In Wireless & Networks, enable WiFi
- Open Wi-fi, select eduroam
Configuring connection to eduroam
- In EAP method, select PEAP
- In Phase 2 Authentication, select MSCHAPV2
- In Identity, enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- In Password, enter your normal University passwor
- Click Connect
Enable wi-fi and select eduroam
- Open Settings
- Enable WiFi
- Select eduroam
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal college password
- Accept certificate when prompted
Proxy setting: in Http Proxy, select off
Enable AirPort and select eduroam
- Open System Preferences
- Select Internet & Wireless
- Enable AirPort
- Select Open Network Preferences
- Select eduroam
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal collegepassword
- Enable remember this network
Configuring connection to eduroam
- In Network Preferences, select Advanced
- Select TCP/IP tab
- In Configure IPv4, select Using DHCP
- Select 802.1X tab
- Ensure the window on left is clear of settings
- Select Proxies tab
- Enable Auto Proxy Discovery
- Select AirPort tab
- Security type of eduroam must display as WPA2 Enterprise, if not, remove by clicking on the minus button and setup again
-
Configure Firefox browser settings
If you are using Firefox as your browser you will need to ensure the following settings are used:
Preferences > Network > Settings > Auto-detect Proxy
Enable wi-fi and select eduroam
- Open Settings
- Make sure that WiFi networking is turned on
- Select eduroam
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal password
- Click Connect
-
Manually connect to eduroam
- Click on Start button and open Control Panel
- In Network and Internet open Network and Sharing Center, select Set up a new connection or network
- Select Manually Connect to a Wireless Network and click Next
- In Network name, enter eduroam
- In Security type select WPA2-Enterprise
- In Encryption type select AES
- Click Next and select Change Connection Settings
- Open Security tab
- In Choose a network authentication method, select Protected EAP (PEAP)
- Click Settings and check Validate Server Certificate
- Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
- Click OK
- Click on the yellow additional information balloon
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal University password
- Click OK and a connection will establish
Check your browser settings
- Click Start and type Run in search box
- Open Run and type inetcpl.cpl , select Connections tab
- Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window
Manually connect to eduroam
- Click on Start button and open Control Panel
- In Network and Internet open Network and Sharing Center, select Set up a new connection or network
- Select Manually Connect to a Wireless Network and click Next
- In Network name, enter eduroam
- In Security type select WPA2-Enterprise
- In Encryption type select AES
- Click Next and select Change Connection Settings
- Open Security tab
- Click Settings and check Verify the server's identity by validating the certificate
- Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
- Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
- Select Specify authentication mode and select User authentication and click Save credentials
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal University password
- Click OK, and OK, and Close to exit
- Click on wireless icon and click Connect to establish your wireless connection
- Check your browser settings
Check your browser settings
- Click Start and type Run in search box
- Open Run and type inetcpl.cpl , select Connections tab
- Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window
-
Manually connect to eduroam
- Click on Start button and open Control Panel
- In Network and Internet open Network and Sharing Center, select Set up a new connection or network
- Select Manually Connect to a Wireless Network and click Next
- In Network name, enter eduroam
- In Security type select WPA2-Enterprise
- In Encryption type select AES
- Click Next and select Change Connection Settings
- Open Security tab
- Click Settings and check Verify the server's identity by validating the certificate
- Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
- Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
- Select Specify authentication mode and select User authentication and click Save credentials
- Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
- Enter your normal University password
- Click OK, and OK, and Close to exit
- Click on wireless icon and click Connect to establish your wireless connection
- Check your browser settings
Check your browser settings
- Click Start and type Run in search box
- Open Run and type inetcpl.cpl , select Connections tab
- Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window
-
