ofsted
ofsted
JOBS INTRANET
Farnborough College of Technology
FOR ADVICE CALL 01252 40 55 55

Connect to College WiFi

eduroam is the recommended WiFi service for students at Farnborough College of Technology, Aldershot College and University Centre Farnborough. It is the main college wireless network allowing access to the internet and connectivity at other eduroam participating educational institutions around the world, wherever you see the eduroam logo. 

Quick start

Select eduroam from the list of wireless networks presented on your device and enter your username in the format below and your password:

Username: 12345@farn-ct.ac.uk
Password: Enter your normal college password

 Android Mobile/Tablet

Enable wi-fi and select eduroam

  1. Open Settings
  2. In Wireless & Networks, enable WiFi
  3. Open Wi-fi, select eduroam

Configuring connection to eduroam

  1. In EAP method, select PEAP
  2. In Phase 2 Authentication, select MSCHAPV2
  3. In Identity, enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  4. In Password, enter your normal University password
  5. Click Connect

 Apple iPhone/iPad

Enable wi-fi and select eduroam

  1. Open Settings
  2. Enable WiFi
  3. Select eduroam
  4. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  5. Enter your normal college password
  6. Accept certificate when prompted

Proxy setting

  1. In Http Proxy, select Off

 Apple Mac

Enable AirPort and select eduroam

  1. Open System Preferences
  2. Select Internet & Wireless
  3. Enable AirPort
  4. Select Open Network Preferences
  5. Select eduroam
  6. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  7. Enter your normal collegepassword
  8. Enable Remember this network

Configuring connection to eduroam

  1. In Network Preferences, select Advanced
  2. Select TCP/IP tab
  3. In Configure IPv4, select Using DHCP
  4. Select 802.1X tab
  5. Ensure the window on left is clear of settings
  6. Select Proxies tab
  7. Enable Auto Proxy Discovery
  8. Select AirPort tab
  9. Security type of eduroam must display as WPA2 Enterprise, if not, remove by clicking on the minus button and setup again

Configure Firefox browser settings

If you are using Firefox as your browser you will need to ensure the following settings are used:

Preferences > Network > Settings > Auto-detect Proxy

 Windows Mobile

Enable wi-fi and select eduroam

  1. Open Settings
  2. Make sure that WiFi networking is turned On
  3. Select eduroam
  4. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  5. Enter your normal University password
  6. Click Connect

 Windows Laptop/Tablet Windows 7

Manually connect to eduroam

  • Click on Start button and open Control Panel
  • In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  • Select Manually Connect to a Wireless Network and click Next
  • In Network name, enter eduroam
  • In Security type select WPA2-Enterprise
  • in Encryption type select AES
  • Click Next and select Change Connection Settings
  • Open Security tab
  • In Choose a network authentication method, select Protected EAP (PEAP)
  • Click Settings and check Validate Server Certificate
  • Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  • Click OK
  • Click on the yellow additional information balloon
  • Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  • Enter your normal University password
  • Click OK and a connection will establish

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window

 Windows Laptop/Tablet Windows 8

Manually connect to eduroam

  1. Click on Start button and open Control Panel
  2. In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  3. Select Manually Connect to a Wireless Network and click Next
  4. In Network name, enter eduroam
  5. In Security type select WPA2-Enterprise
  6. In Encryption type select AES
  7. Click Next and select Change Connection Settings
  8. Open Security tab
  9. Click Settings and check Verify the server’s identity by validating the certificate
  10. Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  11. Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
  12. Select Specify authentication mode and select User authentication and click Save credentials
  13. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  14. Enter your normal University password
  15. Click OK, and OK, and Close to exit
  16. Click on wireless icon and click Connect to establish your wireless connection

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window

 Windows Laptop/Tablet Windows 10

Manually connect to eduroam

  1. Click on Start button and open Control Panel
  2. In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  3. Select Manually Connect to a Wireless Network and click Next
  4. In Network name, enter eduroam
  5. In Security type select WPA2-Enterprise
  6. In Encryption type select AES
  7. Click Next and select Change Connection Settings
  8. Open Security tab
  9. Click Settings and check Verify the server’s identity by validating the certificate
  10. Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  11. Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
  12. Select Specify authentication mode and select User authentication and click Save credentials
  13. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  14. Enter your normal University password
  15. Click OK, and OK, and Close to exit
  16. Click on wireless icon and click Connect to establish your wireless connection

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window

 

 

eduroam is the recommended WiFi service for students at Farnborough College of Technology, Aldershot College and University Centre Farnborough. It is the main college wireless network allowing access to the internet and connectivity at other eduroam participating educational institutions around the world, wherever you see the eduroam logo. 

Quick start

Select eduroam from the list of wireless networks presented on your device and enter your username in the format below and your password:

Username: 12345@farn-ct.ac.uk
Password: Enter your normal college password

 Android Mobile/Tablet

Enable wi-fi and select eduroam

  1. Open Settings
  2. In Wireless & Networks, enable WiFi
  3. Open Wi-fi, select eduroam

Configuring connection to eduroam

  1. In EAP method, select PEAP
  2. In Phase 2 Authentication, select MSCHAPV2
  3. In Identity, enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  4. In Password, enter your normal University password
  5. Click Connect

 Apple iPhone/iPad

Enable wi-fi and select eduroam

  1. Open Settings
  2. Enable WiFi
  3. Select eduroam
  4. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  5. Enter your normal college password
  6. Accept certificate when prompted

Proxy setting

  1. In Http Proxy, select Off

 Apple Mac

Enable AirPort and select eduroam

  1. Open System Preferences
  2. Select Internet & Wireless
  3. Enable AirPort
  4. Select Open Network Preferences
  5. Select eduroam
  6. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  7. Enter your normal collegepassword
  8. Enable Remember this network

Configuring connection to eduroam

  1. In Network Preferences, select Advanced
  2. Select TCP/IP tab
  3. In Configure IPv4, select Using DHCP
  4. Select 802.1X tab
  5. Ensure the window on left is clear of settings
  6. Select Proxies tab
  7. Enable Auto Proxy Discovery
  8. Select AirPort tab
  9. Security type of eduroam must display as WPA2 Enterprise, if not, remove by clicking on the minus button and setup again

Configure Firefox browser settings

If you are using Firefox as your browser you will need to ensure the following settings are used:

Preferences > Network > Settings > Auto-detect Proxy

 Windows Mobile

Enable wi-fi and select eduroam

  1. Open Settings
  2. Make sure that WiFi networking is turned On
  3. Select eduroam
  4. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  5. Enter your normal University password
  6. Click Connect

 Windows Laptop/Tablet Windows 7

Manually connect to eduroam

  • Click on Start button and open Control Panel
  • In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  • Select Manually Connect to a Wireless Network and click Next
  • In Network name, enter eduroam
  • In Security type select WPA2-Enterprise
  • in Encryption type select AES
  • Click Next and select Change Connection Settings
  • Open Security tab
  • In Choose a network authentication method, select Protected EAP (PEAP)
  • Click Settings and check Validate Server Certificate
  • Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  • Click OK
  • Click on the yellow additional information balloon
  • Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  • Enter your normal University password
  • Click OK and a connection will establish

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window

 Windows Laptop/Tablet Windows 8

Manually connect to eduroam

  1. Click on Start button and open Control Panel
  2. In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  3. Select Manually Connect to a Wireless Network and click Next
  4. In Network name, enter eduroam
  5. In Security type select WPA2-Enterprise
  6. In Encryption type select AES
  7. Click Next and select Change Connection Settings
  8. Open Security tab
  9. Click Settings and check Verify the server’s identity by validating the certificate
  10. Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  11. Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
  12. Select Specify authentication mode and select User authentication and click Save credentials
  13. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  14. Enter your normal University password
  15. Click OK, and OK, and Close to exit
  16. Click on wireless icon and click Connect to establish your wireless connection

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window

 Windows Laptop/Tablet Windows 10

Manually connect to eduroam

  1. Click on Start button and open Control Panel
  2. In Network and Internet open Network and Sharing Center, select Set up a new connection or network
  3. Select Manually Connect to a Wireless Network and click Next
  4. In Network name, enter eduroam
  5. In Security type select WPA2-Enterprise
  6. In Encryption type select AES
  7. Click Next and select Change Connection Settings
  8. Open Security tab
  9. Click Settings and check Verify the server’s identity by validating the certificate
  10. Click Configure and uncheck Automatically use my Windows log-on name and password (and domain if any) and click OK
  11. Click OK to return to the eduroam Wireless Network Properties screen and select Advance Settings
  12. Select Specify authentication mode and select User authentication and click Save credentials
  13. Enter username@farn-ct.ac.uk (e.g. 12345@farn-ct.ac.uk)
  14. Enter your normal University password
  15. Click OK, and OK, and Close to exit
  16. Click on wireless icon and click Connect to establish your wireless connection

Check your browser settings

  • Click Start and type Run in search box
  • Open Run and type inetcpl.cpl , select Connections tab
  • Click LAN settings and ensure that Automatically detect settings is checked and click OK to close window
JOBS INTRANET